Where is the Pipe Shrinking Machine Mainly Used?
The pipe shrinking machine is mainly used in construction sites. Iron pipes, square pipes, round pipes, galvanized pipes, stainless steel pipes for reducing diameter and neck expansion are ideal pipe end forming equipment. The steel tube shrinking machine is suitable for all kinds of mechanical high and low-pressure oil pipes, air pipes, water pipes, cable joints, automobile air conditioning pipes, automobile power steering pipes, engine oil pipes, gasoline oil supply pipes, as well as construction accessories, daily hot water pipes. Used in industries such as vehicles, engineering machinery, hydraulic machinery, welding, and cutting equipment. The specifications of the shrinking machine required by different projects are different.
Operating Instructions:
| No. | Name | Technical Parameters | Unit |
| 1 | Range of Reduction
for Diameter | 10 ~ 35 | mm |
| 2 | Diameter of Mother Tube | 16 ~ 40 | mm |
| 3 | Time for
one reduction | 4 ~ 6 | s |
| 4 | Motor | 11 | kw |
| 5 | System pressure | 52 | Mpa |
| 6 | Machine Size | 900*1150*1310 | mm |
| 7 | Machine weight | 1750 | kg |
G400 pipe-shrinking machine operations and processes
1. Take out the mould by rotating it according to arrow direction, no reverse rotation allowed.
2. Moulds can be changed according to different specifications.
3. Head length can be adjusted by middle adjusting rod, loose the belt wheel screw, adjust the length and fasted the screw again.
4. Pour in 80% diesel and 20% engine oil, as the oil pump capacity is big, oil box entrance valve should be fully open, machine valve fix a little oil is ok.
5. After the umbrella-block wear down and the gap becomes big, you can put a gasket between umbrella block and the mould, but the gasket can not be too thick so that machine won't get stuck.
6. The lubrication oil should be changed after it gets dirty.
Safety Precautions
1, Place the machine on a fixed horizontal surface and the calibration level, the machine is stable.
2, Check the oil level before use, to keep the hydraulic oil target position in 1/2 or more.
3, Check the motor rotation, such as rotation error, please adjust the power wiring.
4, When the state machine automatically, please confirm the accuracy of the input data.
5, When the machine is operating, safety, the hands, the body, such as near the action area is prohibited.
6, People must be dedicated machine operation, and the operator should be able to reach and stand within the scope of the emergency stop button.
7, Machine must be grounded.
8, When remove mold, must turn off the power.
9, Please refuel oil regularly.
10, Keep the machine and the environment clean.
11, Not allowed to work in the dust, conductive particles and acids and other places.
Factory picture:
Part of the machine:
Product Tags:
|
|
G800 Hydraulic Pipe Shrinking Machine 3 Cylinder Shrink Wrap Machine Images
|
